Posting here first for 1 week.
Location: Knightdale NC (Raleigh)
Items included:
• 120/240V, 1HP, 1PH, 1,725 RPM motor
• 4,800 RPM, 14,400 CPM three-knife (2.5" dia.) cutterhead
• 6 1/8" cutting width, 1/8" max depth, 1/2" rabbeting
• 46" table: 22.5" rear, 22" front
• 4 7/8" x 35" fence tilts in and out 45°, right and left, with positive 45° and 90°, right and left, stops
• 48.5" x 28.5" x 46"
• Weight: 225 lbs.
Location: Knightdale NC (Raleigh)
Items included:
- Delta 37-866X Jointer
- Delta 52-866X Jointer base
- Power tool mobile base
- Rockler Knife setting jig
- Brand New extra set of knife blades
- Manual
• 120/240V, 1HP, 1PH, 1,725 RPM motor
• 4,800 RPM, 14,400 CPM three-knife (2.5" dia.) cutterhead
• 6 1/8" cutting width, 1/8" max depth, 1/2" rabbeting
• 46" table: 22.5" rear, 22" front
• 4 7/8" x 35" fence tilts in and out 45°, right and left, with positive 45° and 90°, right and left, stops
• 48.5" x 28.5" x 46"
• Weight: 225 lbs.
Attachments
Last edited: