I dont recall a return at fernhollowmans either.
fred
Better to have a short memory than a short...
Freddie, Freddie....When you SawZalled that board to let the motor slip in, the SZ was powered from an extension cord that came through the WINDOW to the shop. 'Member? Opening the window allow the warm (cool in summer) air to come back home.
And, FredP and TravisP, you'all ain't been in the loop but the CV is sucking chips and dust. Tomorrow the filter assembly goes in and finally the finger cuts can heal from the heavy duty electronic assembly.
Thanks so much for your help. I'll think of you every time I hit the switch.
:rotflm:hmmmm..... guess I got shorted on both occasions!:gar-La; right you are sir there was a window there huh? I used to have CRS but I guess its advanced into CRAFT now.:wwink: if ya cant figgure it out ask me next time.:icon_thum of coarse by thene I will have forgot!!!!:rotflm: ummmm.... who is I responding to? oh yeh got it....:dontknow:
fred
All right guys, it seems I have another question. How would you run the ductwork-diagonally across the room, or follow the walls perimeter, and make a turn at the far end? That seems to me to be the greater of the two evils-huh? I am thinking of coming through the wall from the closet, and then running diagonally toward the router table and branching off to each drop, ie: the miter saw and the table saw . Whaddayathink?
Thanks, :confused_:eusa_thin:icon_scra:dontknow: