Bosch 5412 Miter Saw measurement HELP!

[toolferone]

Does any one have the Bosch 5412 12-Inch Dual-Bevel Slide Miter Saw that could measure the black plastic dust port. I need the outside diameter. The sooner the better.
THANK YOU!!

 

[JackLeg]

Went out to the shop and measured mine. It's 1 1/2" OD. Hope this helps!!

 

[SubGuy]

Does any one have the Bosch 5412 12-Inch Dual-Bevel Slide Miter Saw that could measure the black plastic dust port. I need the outside diameter. The sooner the better.
THANK YOU!!

There has to be some interesting back-story here.....:eusa_thin

 

[toolferone]

Went out to the shop and measured mine. It's 1 1/2" OD. Hope this helps!!

Thank you very much! I was really hoping for 1-1/4":thumbs_do since that is the fittings I have.

No story, just fitting up a display at work and did not have this info. I was trying to save a trip to High Point, but it looks like I am going anyway for other reasons.

Thanks.