Benchtop Lathe

[Abutler392]

Looking to buy a benchtop lathe in the near future, just wondering If anybody has one or knows somebody with one they'd let go.

 

[PeteM]

I have a small Wen lathe that's just about new and several gouges, faceplates, etc.
I just have too many projects going and never got to spend much time on it.
I'd sell it all for $150.
If you're interested I can gather up all the accessories and take some pictures.

https://www.amazon.com/WEN-3421-3-2-Amp-Variable-Benchtop/dp/B07ZG9VTT2/ref=asc_df_B07ZG9VTT2/?tag=hyprod-20&linkCode=df0&hvadid=385172629843&hvpos=&hvnetw=g&hvrand=15724595063219973532&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9009619&hvtargid=pla-834533358707&psc=1&tag=&ref=&adgrpid=73789135410&hvpone=&hvptwo=&hvadid=385172629843&hvpos=&hvnetw=g&hvrand=15724595063219973532&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9009619&hvtargid=pla-834533358707

 

[SabertoothBunny]

I was gonna say that there is a NOVA Comett II with a lot of accessories available down here in Fayetteville but the WEN is just as good, if not a better machine, and will likely be noticeably cheaper. If the WEN doesn't work out let me know, I can put in contact with the seller of the NOVA. It is one of the last things from an estate sell offs from an older gentlement who died locally.

 

[Abutler392]

I have a small Wen lathe that's just about new and several gouges, faceplates, etc.
I just have too many projects going and never got to spend much time on it.
I'd sell it all for $150.
If you're interested I can gather up all the accessories and take some pictures.

https://www.amazon.com/WEN-3421-3-2-Amp-Variable-Benchtop/dp/B07ZG9VTT2/ref=asc_df_B07ZG9VTT2/?tag=hyprod-20&linkCode=df0&hvadid=385172629843&hvpos=&hvnetw=g&hvrand=15724595063219973532&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9009619&hvtargid=pla-834533358707&psc=1&tag=&ref=&adgrpid=73789135410&hvpone=&hvptwo=&hvadid=385172629843&hvpos=&hvnetw=g&hvrand=15724595063219973532&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9009619&hvtargid=pla-834533358707

I'm definitely interested

I have a small Wen lathe that's just about new and several gouges, faceplates, etc.
I just have too many projects going and never got to spend much time on it.
I'd sell it all for $150.
If you're interested I can gather up all the accessories and take some pictures.

https://www.amazon.com/WEN-3421-3-2-Amp-Variable-Benchtop/dp/B07ZG9VTT2/ref=asc_df_B07ZG9VTT2/?tag=hyprod-20&linkCode=df0&hvadid=385172629843&hvpos=&hvnetw=g&hvrand=15724595063219973532&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9009619&hvtargid=pla-834533358707&psc=1&tag=&ref=&adgrpid=73789135410&hvpone=&hvptwo=&hvadid=385172629843&hvpos=&hvnetw=g&hvrand=15724595063219973532&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9009619&hvtargid=pla-834533358707

I have a small Wen lathe that's just about new and several gouges, faceplates, etc.
I just have too many projects going and never got to spend much time on it.
I'd sell it all for $150.
If you're interested I can gather up all the accessories and take some pictures.

https://www.amazon.com/WEN-3421-3-2-Amp-Variable-Benchtop/dp/B07ZG9VTT2/ref=asc_df_B07ZG9VTT2/?tag=hyprod-20&linkCode=df0&hvadid=385172629843&hvpos=&hvnetw=g&hvrand=15724595063219973532&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9009619&hvtargid=pla-834533358707&psc=1&tag=&ref=&adgrpid=73789135410&hvpone=&hvptwo=&hvadid=385172629843&hvpos=&hvnetw=g&hvrand=15724595063219973532&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9009619&hvtargid=pla-834533358707

Absolutely! Are you in pittsboro?

 

[PeteM]

I'm definitely interested

Absolutely! Are you in pittsboro?

Yes - Chatham Forest off Thompson St.
I'll PM you my address and phone.