I've watched the you tubes on band saw blade installation and tension but I'm still breaking blades. The work is simple cuts of scrap pallet wood. The blade is an
Olson Saw APG73170 1/4 by 0.025 by 70-1/2-Inch All Pro PGT. I replaced the roller bearings with ceramic blocks.
I (we) do not release tension on the blade during the off hours, could this be my problem?
Olson Saw APG73170 1/4 by 0.025 by 70-1/2-Inch All Pro PGT. I replaced the roller bearings with ceramic blocks.
I (we) do not release tension on the blade during the off hours, could this be my problem?