We're finally moved into the mobile home (for the most part) and the house is under contract. We're currently culling and moving the shop into a shed with no HVAC. I am not comfortable leaving a space heater running when I am not out there.
I insulated the walls, mostly for noise reduction, and to get it out of the way so I could sheath with OSB and paint them, but the floor and roof are not. The downside is that we don't get much solar gain.
So what problems should we anticipate? Do we need to be concerned about glue and water-based finishes freezing? Other finishes geling or separating?
We'll also have the excess heat problem in the summer, but we may be able to run some portable AC.
I insulated the walls, mostly for noise reduction, and to get it out of the way so I could sheath with OSB and paint them, but the floor and roof are not. The downside is that we don't get much solar gain.
So what problems should we anticipate? Do we need to be concerned about glue and water-based finishes freezing? Other finishes geling or separating?
We'll also have the excess heat problem in the summer, but we may be able to run some portable AC.