tool

  1. M

    Restoring old hand planes

    Hello everyone!! I hope this is the right place for this post. I have acquired a variety of hand planes from my grandfather and my wife’s grandfather when they passed away. Unfortunately they all need a bunch of work to be restored. I keep saying I’m going to do it but can never find time...
  2. Top Down

    Top Down

    This was built from 2 - 3 pallets - one was the frame and a couple others to provide pieces for the doors and trim (with lots of leftovers)
  3. Side View

    Side View

    This was built from 2 - 3 pallets - one was the frame and a couple others to provide pieces for the doors and trim (with lots of leftovers)
  4. Open

    Open

    This was built from 2 - 3 pallets - one was the frame and a couple others to provide pieces for the doors and trim (with lots of leftovers)
  5. Door from Side

    Door from Side

    This was built from 2 - 3 pallets - one was the frame and a couple others to provide pieces for the doors and trim (with lots of leftovers)
  6. Closed

    Closed

    This was built from 2 - 3 pallets - one was the frame and a couple others to provide pieces for the doors and trim (with lots of leftovers)
  7. Close up

    Close up

    This was built from 2 - 3 pallets - one was the frame and a couple others to provide pieces for the doors and trim (with lots of leftovers)
  8. Book Box - Joiner and Cabinet Maker

    Book Box - Joiner and Cabinet Maker

    More clenched nails
  9. Book Box - Joiner and Cabinet Maker

    Book Box - Joiner and Cabinet Maker

    Lots and lots of clenched nails.
  10. Book Box - Joiner and Cabinet Maker

    Book Box - Joiner and Cabinet Maker

    This is my attempt at one of Thomas\' projects from the "Joiner and Cabinet Maker". Thomas had to complete the project in 6 hours, I believe. I am definitely not as good as Thomas.
  11. Book Box - Joiner and Cabinet Maker

    Book Box - Joiner and Cabinet Maker

    This is my attempt at one of Thomas\' projects from the "Joiner and Cabinet Maker". Thomas had to complete the project in 6 hours, I believe. I am definitely not as good as Thomas.
  12. T

    Grizzly tools touch up paint

    I recently purchased a used Grizzly G1018 jointer. Right now it's completely disassembled for cleaning and awaiting a few new parts to fine tune it. I now have decided to re-paint the stand and jointer prior to reassembly. Has anyone out there with an older Grizzly tool (approx 1995-2000)...
  13. Tool tote workshop

    Tool tote workshop

  14. Tool tote workshop

    Tool tote workshop

  15. Tool tote workshop

    Tool tote workshop

  16. Tool tote workshop

    Tool tote workshop

  17. Tool tote workshop

    Tool tote workshop

  18. Tool tote workshop

    Tool tote workshop

  19. Tool tote workshop

    Tool tote workshop

  20. Tool tote workshop

    Tool tote workshop

Premier Sponsor

Our Sponsors

Top