mobile

  1. Mobile Drill Press Base Painted Top view

    Mobile Drill Press Base Painted Top view

    Mobile base from Woodsmith plan SN12818.
  2. Mobile Drill Press Base Painted Side View

    Mobile Drill Press Base Painted Side View

    Mobile base from Woodsmith plan SN12818.
  3. Mobile base unfinished side view

    Mobile base unfinished side view

    Mobile base from Woodsmith plan SN12818.
  4. Mobile Base unfinished top view

    Mobile Base unfinished top view

    Mobile base from Woodsmith plan SN12818.
  5. Flip-top dual stander stand

    Flip-top dual stander stand

    The disk / belt sander.
  6. Flip-top dual stander stand

    Flip-top dual stander stand

    The oscillating belt and spindle sander.
  7. Flip-top dual stander stand

    Flip-top dual stander stand

    Simple rotating stops holds the rotating top in either position.
  8. Flip-top dual stander stand

    Flip-top dual stander stand

    The electrical setup for the stand. With the cords carefully fastened in place, I can flip between the two without the cords becoming tangled.
  9. Flip-top dual stander stand

    Flip-top dual stander stand

    Dust collection setup for the oscillating belt and spindle sander.
  10. Flip-top dual stander stand

    Flip-top dual stander stand

    Dust collection arrangement for the disk/belt sander.
  11. Flip-top dual stander stand

    Flip-top dual stander stand

    The drawer provides plenty of space for the accessories and spare parts for both sanders.
  12. Flip-top dual stander stand

    Flip-top dual stander stand

    The top pivots on dowels driven into the rotating top through holes in the sides. A small section of PVC pipe serves as a bearing.
  13. Flip-top dual stander stand

    Flip-top dual stander stand

  14. Flip-top dual stander stand

    Flip-top dual stander stand

  15. 3/8'' Mounting Bolt

    3/8'' Mounting Bolt

    Machine is anchored to base with four 3/8''x1-1/2'' bolts - threaded into 3/8" nuts welded on the Base corner mounting plate. The counter-bored hole in the wood spacer block (4-1/4''x 5-1/2'' x 3/4'') provides clearance for the nut.
  16. Mounting Bolt

    Mounting Bolt

  17. Jet JWBS-16 Band Saw

    Jet JWBS-16 Band Saw

  18. Jet JWBS-16 Band Saw

    Jet JWBS-16 Band Saw

  19. Mounting Bolt

    Mounting Bolt

    Machine is anchored to the universal base with four 3/8'' x 1-1/2'' bolt - with flat and lock washers. Wooden spacer block ( 4-1/4' 'x 5-1/2' 'x 3/4')' provides clearance for 3/8'' nut welded to the HTC corner platform base.
  20. Rear wheels.

    Rear wheels.

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

Top