fish

  1. Artisan Pirate

    Rustic Fretwork Fish, Scroll Saw Project Video

    Hey Everyone! In this scroll saw project video, we make a neat Rustic Fish Fretwork piece that I feel would have multiple uses! I used 1/4 inch material for both the scroll work and the backer board on this project. The design is from the Spring 2024 (Issue 94) of Scroll Saw Woodworking & Crafts...
  2. Artisan Pirate

    Blue Marlin Scroll Saw Portraits

    Blue Marlin Jumping Out Of Water Russ Beard Design I stack cut 3 from 1/4 inch material on my @rikon_powertools scroll saw, the backer boards are also 1/4 inch material The frames were a 2x4 I milled down to 3/4 inch square strips on my Rikon Table Saw and the rabbets for the frames were done on...
  3. Artisan Pirate

    Tropical Fish Art, Scroll Saw Project Video

    Hey Everyone! In this fun scroll saw project video, we cut out and make a beautiful Tropical Fish Art Piece for the summer! The design is from the Big Book Of Scroll Saw Woodworking by Fox Chapel Publishing and I cut the project out of 3/4 inch Oak Laminated Cabinet Grade Plywood. Hope you all...
  4. Artisan Pirate

    Tropical Fish Tank, Scroll Saw Project

    Hey Everyone! In this scroll saw project video, we make this beautiful Tropical Fish Tank completely out of wood! This "Friendly Fish Tank" is a great project to make if you don't have the time to dedicate to a real aquarium! The design comes from the Fall 2018 (Issue #72) of Scroll Saw...
  5. rjm6254

    Fish Decoys

    Here are a couple fish decoys I just finished . Musky and Northern Pike. Basswood 13in /aluminm fins. Good swimmers. Bob
  6. Fish Form Bowl

    Fish Form Bowl

    This bowl was made using a scroll saw to cut segments, glue, sand and finish them. The design is my own free-hand drawing on a piece of poplar. After cutting a segment, I used that to get the outline of the next segment. Sanding on this bowl was tricky and took a lot of time.
  7. froglips

    Cardboard fish hats....

    Yes, thats what I need to make. About 30 of them. They are about 16" by 28". Would you folks who know scroll sawery have any suggestions on how I could cut them out? Any specific kind of blade for cardboard? I think I would gang cut them. Any insight would be appreciated. Jim
  8. froglips

    Site Simplification Project & Fish Fry.....

    Bas started something and I thought it might be good to ask for input. What ideas or things do you feel we could do to simplify our site layout? I'll throw this one out. I think we have too many menus on the top of the page. We have the blue bar, the navbar, the undernav bar and the floating...
  9. Ncdawgs1882

    Finally Finished the Koi Fish

    This one took me a while but really wasn't that hard! I like the way the wood grain looks like the water! Dave O tell me if you think one of your customers would like this!?!
  10. C

    fish tank stand

    My wife and I bought a 16 gallon fish tank the other day and she would like me to build a stand for it. It is 20" L x 13" W and 20.5" H. I'd like to find some plans for a simple stand with a drawer and two doors beneath. Any suggestions? :eusa_thin Chris
  11. Grgramps

    Fish Eye?

    I'm starting to put the finish on the second band saw box and my wife, looking over my shoulder said, "That looks like fish eye." I said that usually occurs when using polyurethane and this is shellac. "No, look at that." Then I realized she was referring to the little knot. Here's what it...
  12. Wall Unit/Fish Tank

    Wall Unit/Fish Tank

    Hickory unit with removable fish tank stand

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top