blast

  1. T

    Metal Ductwork Suggestions

    I live in the Charlotte/Concord, NC area and was wondering if anyone knows where I might find a reasonable supplier for metal duct for my dust collector. I will be using approx. 80 feet of 6" duct and enough 4" for approx. 10 drops. I will also be looking for 3 6" blast gates and approx. 10-12...
  2. DC Remote controlled by blast gates

    DC Remote controlled by blast gates

    DC Remote controlled by blast gates
    • MarkE
    • Media item
    • blast gate remote
    • Comments: 0
    • Album: Jigs and stuff
  3. DC Remote controlled by blast gates

    DC Remote controlled by blast gates

    A remote control for my dust collector that turns on the DC when any blast gate is open.
    • MarkE
    • Media item
    • blast gate remote
    • Comments: 0
    • Album: Jigs and stuff
  4. DC Remote controlled by blast gates

    DC Remote controlled by blast gates

    A remote control for my dust collector that turns on the DC when any blast gate is open.
    • MarkE
    • Media item
    • blast gate remote
    • Comments: 0
    • Album: Jigs and stuff
  5. DC Remote controlled by blast gates

    DC Remote controlled by blast gates

    A remote control for my dust collector that turns on the DC when any blast gate is open.
    • MarkE
    • Media item
    • blast gate remote
    • Comments: 0
    • Album: Jigs and stuff
  6. DC Remote controlled by blast gates

    DC Remote controlled by blast gates

    A remote control for my dust collector that turns on the DC when any blast gate is open.
    • MarkE
    • Media item
    • blast gate remote
    • Comments: 0
    • Album: Jigs and stuff
  7. DC Remote controlled by blast gates

    DC Remote controlled by blast gates

    A remote control for my dust collector that turns on the DC when any blast gate is open.
    • MarkE
    • Media item
    • blast gate remote
    • Comments: 0
    • Album: Jigs and stuff
  8. DC Remote controlled by blast gates

    DC Remote controlled by blast gates

    A remote control for my dust collector that turns on the DC when any blast gate is open.
    • MarkE
    • Media item
    • blast gate remote
    • Comments: 0
    • Album: Jigs and stuff
  9. blazeman45

    DC Blast Gate Switches

    Anyone used or have information as to the quality of the blast gate micro switches sold by Penn State Industries? I started my new mitre saw station which led to me finally installing my DC piping. In want to use the micro switches but would like some good / bad first!! Thanks guys!!
  10. A

    Building a Blast Gate

    My editor asked for tip or short article on how to build a blast gate. Though this is not a tip nor a "short" article, I decided to send it anyway, and let them decide what to do with it. Make Your Own Blast Gates Are you building or expanding a dust collection system? Make your own...
  11. CrealBilly

    Had a blast

    I had a blast out at Jim's yesterday. After figuring out I had a bad ignition coil and blowing a hydraulic hose on the bobcat snaking a big ole poplar tree out of the woods (hot oil bath...) But Sunday things went good, I bucked two big RO's that were up on the top of a hill. It was kinda fun...
  12. J

    Blast Gate Wall Support

    If you have ever tried to rig up something to support a blast gate, Rockler now has a wall support. Saw them in the newest catalog. They fit both plastic and metal gates. After IWF, I will be able to give a report on how they work. One is $3.99, and a set of four is $12.99. Item #'s 26813, and...
  13. JackLeg

    Blast Gate Source?

    There has probably been more said about the topic of dust collection than anything I've read on here. So---- I'm ready to stop "biting the dust" and install a collection system. I presently own a simple Delta single stage system and a good Delta fine particle unit. So, here's my question for...
  14. A

    Auto blast gate alternative

    If any of your who have been contemplating autoblast gates for your DC system, are interested, here is an alternative to the pneumatic actuated blast gates I am building. The following is a link to a pdf file with detailed drawings, instructions, and parts lists. Damper-style DC Autogate...
  15. Ken Massingale

    Blast Gate Question

    I've noticed that all my plastic blast gates don't close completely. Due to the design there is a gap at the closed position, about 3/8" wide. I think I see how to remedy it by taking the doors out and shaping the sides at the bottom. I guess my question is, is there a reason they are made to...
  16. Jim Murphy

    Blast gate actuators

    Well, AlanILW has scored the pneumatic actuators and soon, I hope, we'll be redirected to UTube to see them work. So I've decided to power up my blast gates. I've given this serious consideration. I've ruminated about (oh, I'm sorry, thought about) this for a long time. It's time to jettison...
  17. Trog777

    Blast gate construction

    Any recommendations for which glue to use when joining PVC to MDF? Was going to use epoxy, but was wondering if anyone had an easier sure fire product suggestion. As tight as they fit, it doesn't have to be bullet proof.
  18. Jim Murphy

    Computerized blast gates?

    Amazon.com: EcoGate EG001B Automatic Dust Collection System: Tools & Hardware Anybody know of anyone with one of these rigs? I'm mightily tempted. Two good reviews on Amazon...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top