In the middle of a dresser project and looking for your expertise. It's a nine drawer plan with 5 horizontal dividers and 5 vertical dividers. Joinery for the carcass is dados and rabetts. I'm almost to the point of glue-up which should be simple enough but I have some questions about the best way to tackle it.
My initial thought was to glue the sides together with the top, bottom and 3 other horizontal dividers. The only thing left to add would be to "slide" the vertical dividers into their respective dados then glue and clamp. My concern is that wouldn't the "sliding" in of the vertical dividers just push all the glue through the dados and out the back? :dontknow:
My initial thought was to glue the sides together with the top, bottom and 3 other horizontal dividers. The only thing left to add would be to "slide" the vertical dividers into their respective dados then glue and clamp. My concern is that wouldn't the "sliding" in of the vertical dividers just push all the glue through the dados and out the back? :dontknow: