conversion
-
UPDATE Griz GO490 8" Jointer Shelix head conversion
The Shelix head has now been installed and working great. A friend came over and helped with the removal of the bearings and re-seating the bearings on the Shelix. Overall the process was fairly straight forward and the process took about 2 hours total (this included going back to my friends...- dancam
- Thread
- conversion griz go head jointer shelix update griz go
- Replies: 3
- Forum: Power Tools and Their Use
-
Scale comparison
Here is the conversion with a full sized harpsichord in the background. The conversion instrument is about 4' deep.- ErnieM
- Media item
- conversion harpsichord piano
- Comments: 0
- Album: Piano Conversion
-
The finished instrument
This is the final result.- ErnieM
- Media item
- conversion harpsichord piano
- Comments: 0
- Album: Piano Conversion
-
Soundboard installation
The soundboard (which has already been decorated by my wife, Sandy, is being glued into the case.- ErnieM
- Media item
- conversion harpsichord piano soundboard
- Comments: 0
- Album: Piano Conversion
-
Planning counts
Here the plan is pinned to the soundboard and the position of the bridge, bridge pins, and hitch pins are transferred to the board with an awl.- ErnieM
- Media item
- conversion harpsichord piano plan
- Comments: 0
- Album: Piano Conversion
-
Structure is installed
The pinblock, soundboard liners and upper registers are now installed in the case.- ErnieM
- Media item
- conversion harpsichord piano structure
- Comments: 0
- Album: Piano Conversion
-
Underside of Soundboard
This is the underside of the soundboard showing the 4' hitch pin rail, the cutoff bar and the ribs- ErnieM
- Media item
- conversion harpsichord piano soundboard
- Comments: 0
- Album: Piano Conversion
-
New parts before installation
On the workbench are all of the new assemblies prior to installation.- ErnieM
- Media item
- conversion harpsichord parts piano
- Comments: 0
- Album: Piano Conversion
-
Soundboard liners
The soundboard liners (on which the soundboard will later be glued) are being laminated in the case using 4 pieces of 1/8 inch thick stock.- ErnieM
- Media item
- conversion harpsichord laminating piano
- Comments: 0
- Album: Piano Conversion
-
The front stretcher
Here the new front stretcher is being installed in the case- ErnieM
- Media item
- conversion harpsichord piano stretcher
- Comments: 0
- Album: Piano Conversion
-
Gluing in the pinblock
Here the new pinblock (which will later be drilled for the tuning pins) is being installed in the case.- ErnieM
- Media item
- conversion harpsichord piano pinblock
- Comments: 0
- Album: Piano Conversion
-
W
Dust Collector Conversion Info
This is to everybody who has converted a regular dust collector from a double bag to a pleated filter or filters.I have the delta 850 1.5 horsepower unit with the bags.I have a seperator before the unit that works pretty good but I need desperately to switch to a pleated filter arrangement to...- Woodman2k
- Thread
- collector conversion dust info
- Replies: 10
- Forum: General Woodworking
-
Seeking advice on 2 car garage conversion to shop
Hey guys, this is only my second post as a newbie. I have read several posts where your generous guidance has helped other NCWW members, so I thought that I would pick your collective brain! My wife has agreed to hand over the entire garage space for my future shop barring I agree to scrape...- MikeL
- Thread
- advice car conversion garage seeking shop
- Replies: 14
- Forum: Workshop Discussion
-
Bailey #5 Scrub Plane conversion
Thanks to Mike's interest in a scrub plane I am looking for a #5 to turn into a scrub. Here are some links I found for possibles. Let me know what you think would be a good investement. Be blessed friends. 1...- michaelgarner
- Thread
- bailey conversion plane scrub
- Replies: 3
- Forum: Hand Tools and their Use
