Rockler EZ Pocket Door System Pocket Door Slide

[Chiefifd32]

Hello All...
Has anyone used the Rockler EZ Pocket Door System Pocket Door Slide/slides (or similar brand). I'm being asked to make a wall of lower cabinets basically. One of the sections of cabinet will have two cabinet doors that would slide back into the inside of the cabinet. This would allow it to be used as a desk, but when the chair is removed would appear as the rest of the cabinets.
I've never made or used this type of pocket slides, any input would be appreciated.
They don't want to leave the space it open where the chair would be, as that is the easiest solution.
Looking forward to your photo's, and hardware application advice.

 

[Chiefifd32]

I finished the pocket doors for the cabinet build. It came out very well. The middle doors are pocket doors and work very nice.
I used Knape slides.......

 

[cyclopentadiene]

I used the slides from Rockler on a television stand. These work perfectly. I did a single track so the two doors can butt together in the center of the cabinet or be at the opposite ends. Alternatively, you can use 2 tracks and the doors slide behind one another. I highly recommend the product. It works