This is free to a good home. If you happen to have a Excel Router table that is a bit dated this brace may make the table better. It is a retro fit brace the bolts to the skirt and table. It then has a few set screws for fine adjustments. The earlier tables did not have a brace kit. I think that the ones that they are selling now do have this kit by default.
This is the kit for the aluminum table. I think it would work on the steel one too. You'll need to purchase 4 small hex head set screws that go in the braces for fine adjustments.
JessEm sent me the brace b/c my table bowed in the middle. They then accidentially sent me the brace for the steel table. So, I ended up with 2 braces.
If your interested you can drop by my house and pick it up. I live in Raleigh near NCSU. PM me for directions. Or you could contact Jessem and see if they will send you one.
Anyway - I ended up with a spare, so if it will help anyone out, your welcome to it.
~Huck
This is the kit for the aluminum table. I think it would work on the steel one too. You'll need to purchase 4 small hex head set screws that go in the braces for fine adjustments.
JessEm sent me the brace b/c my table bowed in the middle. They then accidentially sent me the brace for the steel table. So, I ended up with 2 braces.
If your interested you can drop by my house and pick it up. I live in Raleigh near NCSU. PM me for directions. Or you could contact Jessem and see if they will send you one.
Anyway - I ended up with a spare, so if it will help anyone out, your welcome to it.
~Huck