GMT Air Cooled CNC Spindle 2.2kW 220/380V 24000 RPM S With Delta Inverter. Includes full ER20 collet set.

[timf67]

GMT Air Cooled CNC Spindle 2.2kW 220/380V 24000 RPM S With Delta Inverter. Includes full ER20 collet set. Asking $750


Features & Specs:


Dimensions: W: 90mm (3-5/8") H : 135mm (incl. connector) L: 270mm (10-5/8") - body, 350mm (~13-7/8") - overall.

Power: 2.2 kW (3 HP)

Voltage: 220V 3 Phase (Inverter Output Voltage)

Current 9.7A

Frequency: 0~400 Hz

Speed: 0~24000 RPM stepless.

Manufacturer Recommended Working speed: 6000-24000 RPM

ER20 collet

Grease Lubrication

Runout off: less than 0.02mm (0.001")

Air Cooling

Weight: 8.5kg ( 18lbs)

Sent from my iPhone using Tapatalk

 

[Woodman2k]

Tim, does it include all the cabling needed to wire it on any size router platform under 4 by 8?

How am I a new user? After 15 years on the site.

 

[mdbuntyn]

How am I a new user? After 15 years on the site.

It's been more than 30 days since you last logged in, so your user level has been reset. It should revert to your previous level tomorrow.

 

[timf67]

Tim, does it include all the cabling needed to wire it on any size router platform under 4 by 8?

How am I a new user? After 15 years on the site.

No, you would have to supply your own wire/cable from the power source to the inverter and to both the spindle from the inverter and the inverter to whatever your cnc controller is


Sent from my iPhone using Tapatalk