Been working out the details on my new Kaypex. A strip of ZCI tape helped. ZCI fence is the next issue. The only reason I would not want to just bolt on some 1/4 hardboard to the wings is to keep that last 1/4 inch of depth.
I saw this expensive replacement for the lower fence that holds a sacrificial block in the center. Looks like it would work but the costs add up.
The other problem I have is the open table does not leave a perch for my million dollar stick with some miters and short pieces. Clamp won't reach.
I like their table ZCI as one can slip in inserts with bevel instead of removing and cleaning up the yellow tape.
I saw this expensive replacement for the lower fence that holds a sacrificial block in the center. Looks like it would work but the costs add up.
The other problem I have is the open table does not leave a perch for my million dollar stick with some miters and short pieces. Clamp won't reach.
I like their table ZCI as one can slip in inserts with bevel instead of removing and cleaning up the yellow tape.
