A new project.

[jaustin]

A friend ask me to make him a new Rifle Rack. So this is what we came up with.

Made with Red Oak. not sure how i am going to finish it.

 

[McRabbet]

Nice rack -- I'd finish it with a coat of General Finishes Seal-A-Cell followed by 2-3 coats of Arm-R-Seal. Use cotton lint-free rags and store them in the cans between coats after a blast of Bloxygen. I usually lightly sand with 320 grit between coats.

 

[woodArtz]

Forget the rack... gimme the M4 :lol:. Seriously, nice looking design :icon_thum.

 

[jaustin]

Nice rack -- I'd finish it with a coat of General Finishes Seal-A-Cell followed by 2-3 coats of Arm-R-Seal. Use cotton lint-free rags and store them in the cans between coats after a blast of Bloxygen. I usually lightly sand with 320 grit between coats.

I am waiting for them to get a picture of a fishing rod display to try and match.

Which i most likely ill need help on figuring it out, since they don't know what it is finished with.

 

[jaustin]

Forget the rack... gimme the M4 :lol:. Seriously, nice looking design :icon_thum.

You would have a better chance on getting the rack than the rifle.:qleft7: :gar-La;

they gave me a picture of a rack they seen and i built from that.

I enjoyed building that one,it was different. But they both are fun to build.

 

[toolman]

Nice Gun Rack!! Nice Gun (M4)!! :qleft7: :qright5:

 

[JackLeg]

Nice job on the rack. And, that the kind of person I'd like to have for a friend. He's got some nice pieces there.

 

[Joe Lyddon]

Very nice rack and guns... looks like you have them in your shop... any problem with dust?

 

[Joe Lyddon]

Nice rack... Nice design...

Looks like you're going to have to make a larger one... too small. :gar-La;

Might as well blow that rattler's head off before starting... on the floor next to it... :rotflm:

 

[jaustin]

Here are a couple pics of the finished rack.
stained with gunstock stain and a few coats of lacquer.