ruobo
-
Oak Woodworking Bench
Oak Woodworking Bench with leg and end vises, and work piece slider, made from leftover large oak beams, top is 3 1/2" thick and legs are 5"x5", the 5" through and 2" deep mortises and tenons in legs and holding the top in place were hand cut, this is...- Guy in Paradise
- Media item
- Comments: 0
- Category: Tools/Equipment - 2010 Calendar Contest
-
Oak Woodworking Bench
Oak Woodworking Bench with leg and end vises, and work piece slider, made from leftover large oak beams, top is 3 1/2" thick and legs are 5"x5", the 5" through and 2" deep mortises and tenons in legs and holding the top in place were hand cut, this is...- Guy in Paradise
- Media item
- Comments: 1
- Category: Tools/Equipment - 2010 Calendar Contest
-
Oak Woodworking Bench
Oak Woodworking Bench with leg and end vises, made from leftover large oak beams, top is 3 1/2" thick and legs are 5"x5", through mortises and tenons were hand cut, this is a very stable bench, which can be taken apart. The hickory bench next to it was made for a place...- Guy in Paradise
- Media item
- Comments: 0
- Category: Member Galleries
-
Oak Woodworking Bench
Oak Woodworking Bench with leg and end vises, and workpiece sliding holder, made from leftover large oak beams, top is 3 1/2" thick and legs are 5"x5", through mortises and tenons were hand cut, top is held in place with tenons and mortises, as well; this is a very...- Guy in Paradise
- Media item
- Comments: 0
- Category: Member Galleries
Our Sponsors
