r or t
-
Kreg R/T Raffle - Thanks
Well the Kreg R/T is home awaiting assembly. A very special thanks to Tom Hintz. When I posted the Pony Express request the first e-mail I received was from Tom H. He graciously offered to deliver the Kreg R/T to a mid point. Yesterday I met Tom and his lovely wife Beth at the Hickory...- dancam
- Thread
- kreg r or t raffle
- Replies: 3
- Forum: User Announcements
-
R/T Tenon Jig
American Woodworker bought this one. Before I got a Woodrat, I used this jig for cutting tenons on door rails and still do if the 'rat is setup for something else. It's just a sled with a base, a mass block and a fence. I use a 1/2" spiral bit set usually 1" high. Pic shows side cut position...- Joe Scharle
- Thread
- jig r or t tenon
- Replies: 2
- Forum: "How To" Forum
-
Under R/T Dust Port
Thought I'd pass this along. Not fancy, does the job, doesn't take long to make and lets the insert/base pop out. The clear acrylic forms easily with a heat gun.- Joe Scharle
- Thread
- dust port r or t
- Replies: 5
- Forum: Workshop Discussion
