Link to the thread with Photos!
http://www.ncwoodworker.net/forums/showthread.php?t=61249&page=2&highlight=february
http://www.ncwoodworker.net/forums/showthread.php?t=61249&page=2&highlight=february
This is hard to decide. So much clutter, so little organization, and I thought I was bad. Y'all are way better at this than I am.
At the end of every project, my shop looks like an amalgam of these. To make a 6"x6" plywood box, I apparently need 16 clamps, 4 chisels, two different table saw blades, 3 squares, #6 and #8 screws, pocket hole screws, dowels, a custom band saw jig, CA glue, yellow glue, epoxy, a block plane, 8 different grits of sandpaper in 2 sizes, 4 router bits, and I have to change the bag for the dust collector twice.
I am seriously considering a bunkbed for my next workbench, just so I have double the surface area.
Farmerbw is our winner! Please contact KenofCary to make arrangements to receive your $25 prize.