I am currently building a sewing table with red oak and oak plywood. There are cracks in the plywood veneer and of course the oak is a coarse wood. I have never used wood filler before and since I wanted to do a good job, I wanted some input on what to do. I plan to stain and then put polyurethane on it, but would consider anything esle at this point. I spoke to one person who suggested using wood filler after staining to fill the pores and cracks. He also suggested using the same brand of stain and poly as well as using an oil base poly when using an oil based stain.
Any suggestions?
Jay
Any suggestions?
Jay