I purchased a piece of Quilted maple from Raleigh Woodcraft for about $65- it was 12"x20"x2.25". I made one jewelry box and also just finished this end table.
I think the book match came out great
[/url][/IMG]
I was trying to use my band saw to resaw thin slices <thinking this would provide the smallest kerf> and the blade started to angle so I ended up cutting one side, then the other on the TS before I finished the center uncut portion with the bandsaw.
I used ARM-R-SEAL gloss finish. This piece matched the other pieces of furniture I made from the Wormy Maple.
[/url][/IMG]
Other than the top, the rest was made from curly maple.
[/url][/IMG]
The frame around the top came out even.
[/url]
[/IMG]
[/url][/IMG]
[/url][/IMG]
:wsmile:
ccasion1
I think the book match came out great
I was trying to use my band saw to resaw thin slices <thinking this would provide the smallest kerf> and the blade started to angle so I ended up cutting one side, then the other on the TS before I finished the center uncut portion with the bandsaw.
I used ARM-R-SEAL gloss finish. This piece matched the other pieces of furniture I made from the Wormy Maple.
Other than the top, the rest was made from curly maple.
The frame around the top came out even.
[/IMG]
:wsmile:
ccasion1