Tropical Whale Tail Art.
Cut from 3/4 inch pine with a 1/4 inch backer board.
With so many tight V cuts in this one I always start at the pilot hole and go down one side of the V and back the blade back to the pilot hole and follow the other side completing the cut. This ensures that the V is as nice and as clean as possible.
I'm glad I was able to save a decrepit looking piece of pine I had in the scrap bin and turn it into something beautiful! The design is from Holiday Scroll Saw Ornaments by @foxchapelpublishing
.
.
#ArtisanPirate
Cut from 3/4 inch pine with a 1/4 inch backer board.
With so many tight V cuts in this one I always start at the pilot hole and go down one side of the V and back the blade back to the pilot hole and follow the other side completing the cut. This ensures that the V is as nice and as clean as possible.
I'm glad I was able to save a decrepit looking piece of pine I had in the scrap bin and turn it into something beautiful! The design is from Holiday Scroll Saw Ornaments by @foxchapelpublishing
.
.
#ArtisanPirate
Attachments
-
369268140_7055829454450454_6088422148081427205_n.jpg339.3 KB · Views: 89
-
369271224_7055829464450453_8805792275673010191_n.jpg267 KB · Views: 80
-
369718391_7055829457783787_5224240622756398090_n.jpg308.2 KB · Views: 83
-
370262525_7055829451117121_9104154181473528062_n.jpg159.4 KB · Views: 87
-
370567584_7055829444450455_6371082328114314917_n.jpg268.1 KB · Views: 95