Vise

[tvrgeek]

Hard to believe, I have too many vises. Generic, probably Grizzly but I don't remember. With faces. $20

It was handy, but where it was mounted is where my high-lift cyclone sits.

 

[Allan]

I’m interested! Sending message.

 

[ChemE75]

I’m finally about to mount the same one. Got from grizzly on sale at $25 but seen elsewhere for $100+. Feels solid, no quick release, but will be a vast improvement for my bench which is an old section of bowling alley. It’s got a large capacity so I’m just turning the 2 rear supports to put on back side of jaw and adding a 3/4” board between bottom mount and bottom of benchtop to allow a bit deeper jaw face. Bowling alley is only 2-3/8” thick so a bit lean on face depth..