Does anybody in the Raleigh area have a large SDS MaX hammer drill bit that I may be able to borrow? I have a large Hilti hammer drill, but need to drill a hole no less than 1" diameter (and I can go up to 1-5/8") at least 18" deep.
McMaster Carr sells the bit that I need for about $150.00, but I hate to spend that much on a bit that I'll only use one time.
I've found some on e-bay for less, but figured that I'd check to see if there was one available for borrow.
Thx.
Scott
McMaster Carr sells the bit that I need for about $150.00, but I hate to spend that much on a bit that I'll only use one time.
I've found some on e-bay for less, but figured that I'd check to see if there was one available for borrow.
Thx.
Scott