Merry Christmas NCWW's,
I just wanted to make it official: I got the G0490, it's a monster~! :gar-Bi
Got the G0490 before I got the Shelix cutterhead? :banana: But how in the heck do I change it out?
Here are some pictures of it getting put together/Cleaned up. PS WD40 works like a champ to get the cosmoline off~! :gar-Bi
Is the foot that raises the jointer supposed to be bent/twisted?
Is this ok? a hole in the pulley for the belt?
Getting ready to put the shelix head on
Got the front part off and the two bolts out that hold the head it, not sure if I need to take the back two out or what I need to do to change it out to the shelix cutterhead? :icon_scra :help:
When I first installed the fence it was right on 90 degrees, but the fence was sliding on the bed and marring it up. :eusa_doh: So I adjust the part that attaches to the back of the machine up a little and now the 90 degree is way off. I adjusted the fence 90 degree stop, and it it is dead on when it is towards the back of the bed, but off when it is closer to the front of the bed??? :BangHead: :help:
Other than not knowing how to fully make the machine perfect, I love it~! The beds are nice and long and it sure has some power wow~! I think I need to tighten the belt a little more though as it wobbles a little.
Wish I had a few NCWW folk around to give me a hand with this~! ccasion1
Thanks for looking a commenting
I just wanted to make it official: I got the G0490, it's a monster~! :gar-Bi
Got the G0490 before I got the Shelix cutterhead? :banana: But how in the heck do I change it out?
Here are some pictures of it getting put together/Cleaned up. PS WD40 works like a champ to get the cosmoline off~! :gar-Bi
Is the foot that raises the jointer supposed to be bent/twisted?
Is this ok? a hole in the pulley for the belt?
Getting ready to put the shelix head on
Got the front part off and the two bolts out that hold the head it, not sure if I need to take the back two out or what I need to do to change it out to the shelix cutterhead? :icon_scra :help:
When I first installed the fence it was right on 90 degrees, but the fence was sliding on the bed and marring it up. :eusa_doh: So I adjust the part that attaches to the back of the machine up a little and now the 90 degree is way off. I adjusted the fence 90 degree stop, and it it is dead on when it is towards the back of the bed, but off when it is closer to the front of the bed??? :BangHead: :help:
Other than not knowing how to fully make the machine perfect, I love it~! The beds are nice and long and it sure has some power wow~! I think I need to tighten the belt a little more though as it wobbles a little.
Wish I had a few NCWW folk around to give me a hand with this~! ccasion1
Thanks for looking a commenting