Hello Everyone!
On the surface, the title of this post doesn't appear be about woodworking, but trust me - this project was all about woodworking, and stopping to make some jigs along the way. Just so you will know, I posted this on Phil Thien's forum and that other form, but I wanted to be share with all of you too!
This project was to integrate Phil Thien's dust separator into my 16 gallon Shopvac. Initial tests are encouraging! It appears to work good! I used a Lowe's bucket to mount the shopvac to the separator. To my surprise, the Shopvac lid locks with this bucket.
A final note to anyone considering building this project! It's not for advanced, intermediate, or amateur woodworkers! For this project, you simply must be persistent!
Click on this link to view project photos; be sure to read the captions for details.
https://picasaweb.google.com/104032558344910866540/ShopVacDustSeparator?authuser=0&authkey=Gv1sRgCPKIrsSQ4POhWQ&feat=directlink
-Don
On the surface, the title of this post doesn't appear be about woodworking, but trust me - this project was all about woodworking, and stopping to make some jigs along the way. Just so you will know, I posted this on Phil Thien's forum and that other form, but I wanted to be share with all of you too!
This project was to integrate Phil Thien's dust separator into my 16 gallon Shopvac. Initial tests are encouraging! It appears to work good! I used a Lowe's bucket to mount the shopvac to the separator. To my surprise, the Shopvac lid locks with this bucket.
A final note to anyone considering building this project! It's not for advanced, intermediate, or amateur woodworkers! For this project, you simply must be persistent!
Click on this link to view project photos; be sure to read the captions for details.
https://picasaweb.google.com/104032558344910866540/ShopVacDustSeparator?authuser=0&authkey=Gv1sRgCPKIrsSQ4POhWQ&feat=directlink
-Don