I have finally gotten back to building the kayak. Being 18 feet long , it took up most of the floor space in my shop and knowing that it will take quite a while; I move it to my side porch. The frame is all finished and alligned and ready to receive the 5/8 inch strips.
This is the set up of the shaper to run the cove and bead edge. The power feeder will be a great help and also give a consistent feed rate thus a much better quality of cut. The cutters are 1 1/4 inch bore and make very quick work of the job.
This is the set up of the shaper to run the cove and bead edge. The power feeder will be a great help and also give a consistent feed rate thus a much better quality of cut. The cutters are 1 1/4 inch bore and make very quick work of the job.