I have been somewhat lazy in getting this dresser done. I screwed up the bottom and last drawer and cut the rabbets on the front the wrong way for the c*ck bead. So, I had to work out getting some wood that matched the rest of the drawers pretty well, and you know how it goes.
So, I have now completed all of the construction with the exception of the door hinges that I am waiting for delivery on. I did make the door specifically to work with inset euro hinges and downloaded the specs and installation instructions in advance. I have fitted and adjusted all of the drawers, sized the top, done all my routing, etc. So, for the rest of the evening I am going to be sanding up to 220 grit, and hopefully tomorrow start the finishing process so wish me luck. I am going to use pretty much the exact same materials and finish as DavidF used on his bed. Fortunately, he has given me fair warning of what to be aware of so I hope I do not repeat his mistakes.
All feedback including constructive is appreciated.
So, I have now completed all of the construction with the exception of the door hinges that I am waiting for delivery on. I did make the door specifically to work with inset euro hinges and downloaded the specs and installation instructions in advance. I have fitted and adjusted all of the drawers, sized the top, done all my routing, etc. So, for the rest of the evening I am going to be sanding up to 220 grit, and hopefully tomorrow start the finishing process so wish me luck. I am going to use pretty much the exact same materials and finish as DavidF used on his bed. Fortunately, he has given me fair warning of what to be aware of so I hope I do not repeat his mistakes.
All feedback including constructive is appreciated.