hi... i have an electric guitar body all glued up and ready to be cut out, but i don't have a band saw, anyone on here help me out with or know of a place in raleigh that could do that would be very much appreciated? the body is a little over 2" thick (1 3/4" mahogany 5/16" hard maple, which FredP so generously helped make possible) the shape is already drawn on (there are a few pretty sharp curves in it), and i actually have a template double sided taped on, for which i tried to cut the shape out with a flush cutting router bit, but after about an hour of tear outs and a sore left arm, i think it'd be a whole lot easier to see if someone can cut it with a band saw.... thanks so much for any help... jonny