So I've been playing more electric guitar lately and have decided that I want a little more than just my clean and distorted channels on my amp. So in order to have somewhere to put my effects pedals I decided I wanted to build my own pedal board after seeing how expensive just a board is. The size of the one I built is about $100 from most music stores. I built this one for free. I was given the wood a while back and just haven't had a project to use it. This seemed to be as good as any. The board is 17x12 currently. I'm working out how high I want the front to be to put a little bit of an angle on it. I'm figuring no more than about 3" high. So Here is a picture of it as it is. I hope to have it finished up tonight or tomorrow after church. We'll see..