Since I was digging these pics out for something else I thought I would post them here, too. This is an A&C coffee table I built on commission for a friend a few years back. I copied (actually went to the store and took measurements) a design from the Stickley Furniture Co. except I made a mistake, er, made a change :-D:-D and added four extra through tenons. Though the ray fleck doesn't show that well it is all QSWO. It is finished with Jeff Jewitt's brew for A&C furniture- his TransTint water based dye under a dark oil stain and sealed for durability with multiple coats of wipe-on poly (the actual color is different than the pic). I also experimented with a photo program to achieve the black background and lettering.
The drawers go all the way through and have fronts on both sides of the table.
I have been using a rubber stamp and ink for my mark until I find a design I like enough to have made into a branding iron.
The drawers go all the way through and have fronts on both sides of the table.
I have been using a rubber stamp and ink for my mark until I find a design I like enough to have made into a branding iron.