threaded

  1. turned box with threaded lid

    turned box with threaded lid

    turned box with threaded lid in sugar maple
    • edspec
    • Media item
    • box lid threaded turned with
    • Comments: 0
    • Category: Member Galleries
  2. threaded lid box

    threaded lid box

    Lidded box with threaded lid in sugur maple
    • edspec
    • Media item
    • box lid threaded turned with
    • Comments: 0
    • Category: Member Galleries
  3. threaded lid box

    threaded lid box

    Lidded box with threaded lid in sugur maple
    • edspec
    • Media item
    • box lid threaded turned with
    • Comments: 0
    • Category: Member Galleries
  4. CarvedTones

    short piece of 1"-8TPI threaded rod

    I am looking for a really short piece; probably under 2". It's for this: http://www.ncwoodworker.net/forums/f33/latest-version-my-carving-stand-30661/ the idea is that I make another little top for the Panavise with a little nub of 1"-8TPI thread sticking out and I could easily go back and...
  5. CarvedTones

    Tiny chucks - MT/arbor versus threaded

    Note to Mike - If you think my lathe is cute, wait until you see these chucks. :gar-Bi I have not succumbed yet; I am still focused on the small stuff. The chucks I am looking at would be used for spindle turning and usually with a live center on the other end. I am quickly discovering that...
  6. L

    Threaded insert question

    They say there is no stupid question so here goes. I am attaching the top of a display cabinet to the bottom section. I have four threaded inserts that I have placed in the bottom of the top section aligned over four holes that were drilled into the top of the bottom cabinet. This is a...
  7. Tarhead

    Threaded Rod Glue Spreader

    Here's a neat idea to spread glue with a section of threaded rod (or a long bolt could be used). http://www.woodworkersjournal.com/resource/Gluing/Issue1/index.html
  8. mshel

    Large size threaded inserts

    I am looking for some large, ie 3/8" or larger threaded inserts. I am coming to Raleigh tomorrow and just wanted to know who might have such an animal so I don't burn a lot of gas chasing ghosts. I will be using the inserts and hanger bolts to repair a king size bed for a client who wants to...
  9. smessick

    Threaded hole in miter slot

    I just bought a DeWalt Woodworker's Table Saw and both miter slots have a threaded hole in the bottom. Anybody know what those are for?

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top