i started out naively thinking that it would be a quick 45 miter, then i was thinking it will be a 30 / 60 degree combo. then i realized its something altogether different.
I used a easy 2x2 square to try and figure out the two angles involved. I had a unfinished table saw sled i cannibalized...
Early in my woodworking "career" I built a crosscut sled that has been used extensively. Recently, I purchased a used Incra Miter 5000 which has been used little. I am thinking of replacing my crosscut sled with a newer more accurate one. My question is whether the Miter 5000 replaces a shop...
Made a Crosscut, and a dual purpose Miter sled. The miter sled suits my needs as I use mostly short pieces of wood, and saved making 2 separate miter sleds.
Made a Crosscut, and a dual purpose Miter sled. The miter sled suits my needs as I use mostly short pieces of wood, and saved making 2 separate miter sleds.
Made a Crosscut, and a dual purpose Miter sled. The miter sled suits my needs as I use mostly short pieces of wood, and saved making 2 separate miter sleds.
Made a Crosscut, and a dual purpose Miter sled. The miter sled suits my needs as I use mostly short pieces of wood, and saved making 2 separate miter sleds.