I have approximately 300 bd feet of QSWO from one log. This wood is absolutely phenomenal. I skip planed one piece and am showing the picture here. It has been kiln dried to 9% mc and is ready for sale. I am offering it for sale for the woodworkers in this forum for $2000 for the whole lot...
I am in the planning stage of determining which finish I will use on a RSWO book case that I am building. The bookcase is a variant of the Jefferson bookcase recently published in popular woodworking but with fewer redundancies (read, larger boxes with sliding dovetail shelves).
I want a...
I was called to see if I had an interest in buying 250 bf of QSWO. You know what that answer was. It was left over from a office building door project and was stored inside for the last four years. Of course I bought it and it turned out to be about 300 bf. All 8 ft long, planed on both sides...
http://eastnc.craigslist.org/mat/2243003298.html
Rough Sawn Beams - $120 (Rocky Mount)
Date: 2011-03-02, 12:37PM EST
Reply to: sale-7rx3w-2243003298@craigslist.org [Errors when replying to ads?]
One walnut beam: 4" x7" x 12'
One cherry beam: 4" x 10" x 12'
Both 25 years old
Location...
I need a little help finding in stock quarter sawn White Oak Ply. I need 6 sheets of ¾ and 4 sheets of ¼. When the material was priced they forgot to tell me it was a special order. I live in Charlotte and will travel far to get it. Thanks Ian
I'm considering using green sawn eastern red cedar for the frame of an outdoor cabinet. I do not have a lot of experience woodworking and no experience with green lumber. Can I joint/plane this stuff? I'm not sure how "green" it is but I'll ask to get an idea the next time I talk to the seller...
I did this on scrap luan because I didn't think it would turn out well, and now I am kicking myself for that because I like it. Now I just need to practice making these patterns from pictures and I will be good to go!
What do the numbers 8 and 4 mean? And please don't laugh too hard I really don't know. One of these days I'll have enough experience to consider my self a rookie...
does anyone know where to find quarter sawn hard or curly maple, and honduran mahogany? these are to be used in building a guitar... i'm in the raleigh area but will drive or mail order for the right pieces... thanks
Last August had a lot of fun slabbing oak into lumber. It has been a year now and I am looking at bringing it into my basement to further season. I noticed that there are small worm holes on the edges of some of the boards but not really on the board faces. This leads me to several questions...
Thinking about making up some flooring for my own personal use. It'll be RO, I have enough to do what I want in either Flat or QS. Is there any difference in installation technique or is it mainly appearance preference. I'm thinking it's appearance, but thought I would check with the experts...
I'm in Raleigh and have a stack of 5/4 rough sawn pine 10'-12', varying widths (6"-13") I need to have planed to 4/4. Total of 66 boards. It is too much for my bench top planers (Ryobi and Dwalt) to deal with.
Anyone in the area that knows of someone that would help with this? I can rip and...
I am looking for a lumber source near Greensboro of rough sawn lumber of any and all species. Is there such a place in say a 50 mile radius. Thanks in advance.
Davis