I am trying to find some folding table legs better than the stuff at HD - I have a customer who needs 30 tables built, and while the table he has now has an HD set of legs on it, they are really crap. I'd like to upgrade a little to heavier gauge and smoother function - any ideas?????
I have a project coming up where I need to make two matching tapered columns, but alas I do not have a lathe. I wanted a way to create them easily and repeatability was important – here is the jig I came up with.. A box.. On the front end I have a vertical adjustment to set the diameter at one...
Recently completed project, mahogany dressing table with cabriole legs and tiger paw feet. The table was made according to plans from http://www.toolsforworkingwood.com/indextool.mvc?prodid=LL-M-8 similar to a table the Museum of Early Decorative Arts (MESDA) in Winston-Salem, North Carolina. I...
I'm looking for some pre-made red oak table legs for my drafting table.
I found this site but the prices seem kind of high but I don't know.
http://www.tablelegs.com/Columns/CraftsmanEraColumns/LargeCraftsmanEraColumns36Inch.aspx
Are these prices OK or are they on the high side?
Anyone...
I want to build my first ever slab bench, and i am held back because I am not sure how to attach the legs to the slab. I have seen benches with tree branches as legs and these were I am guessing, turned round on one end and then fitted into a hole in the slab. that would work but how...
My sister wants me to make a table for her. It will be largest (likely 40"X96") one I have ever built and it needs to have removable legs. All I have ever done is M&T so I have zero experience. I have looked at various ideas on the web but would like to tap the knowledge of anyone who has...
Found this today:
((((((((( Table Legs )))) Hundreds to choose from )))))))))))))) - $1 (lyman, near clock restraunt hwy 29
Call Bill at 864 621 4646 ......................Bill is semi-retiring, help him clear out! ....................wood legs only $1-$5 each.............Red Cart is $60...
http://raleigh.craigslist.org/tls/2349054890.html
JET Wood Lather and Chisels - $500 (Lucama)
Date: 2011-04-27, 11:49AM EDT
Reply to: sale-d79jc-2349054890@craigslist.org [Errors when replying to ads?]
I am selling my 14" x 42" VS PRO Wood Lathe with Legs. I am selling it with a...
Attached are photos from the dry fit of my latest project. The table is made of walnut. The top is 15 1/2 " x 35" single board elevated 1/2" above the legs and 1/4" from the rails. The legs are tapered in both directions with a slight curve. This was my dry fit which seems to work well. I plan...
I cut out and glued up the QSWO legs for my Morris chair today. I'll never use this beautiful and expensive wood for this purpose again. I nearly cried as I glued the gorgeous flecks and rays to the INSIDE OF A CHAIR LEG! :gar-Cr Where it will NEVER be seen!:wsad: In the future I'll laminate...
Hey guys i am building a contemporary style sofa table with an elegant appeal and I am in need of some block style tapered legs that would accommodate a 4" drawer space. I am need of four legs 29" long and 4 - 21" in length.
preferably hardwood legs or either maple legs revealing slight...