cast

  1. JCraig

    Cast Iron Extension Table

    I recently purchased at Delta 36-650 Contractors Saw. I have been trying to locate some CI Ext. Tables. Would anyone have any suggestion as to where I might find these. I was able to get this saw at a really good price, so I was, at the time not concerned about CI wings. But, I saw Mike...
  2. Mike Camp

    Craftsman 10" table saw cast iron - $25 (Fuquay varina)

    Not mine. I'm pretty sure this is one of the classic Craftsman belt drives. Needs a good bit of TLC but the price is right. http://raleigh.craigslist.org/tls/2761036520.html
  3. B

    Planer in/outfeed tables: rollers vs. cast iron

    On my new to me planer, a 15" Jet JWP 15CS, the in and outfeed tables have a steel frame with rollers. In my reading on various forums I"ve seen where people have considered the cast iron infeed and outfeed tables to be a substatial upgrade. Other than the vibration reducing and visual...
  4. SawstopWithPromax

    SawstopWithPromax

    Retrofit Benchdog ProMax to Sawstop ICS
    • ewingda
    • Media item
    • benchdog cast iron router sawstop table tablesaw
    • Comments: 0
    • Category: Member Galleries
  5. J

    Hand Cast Pendants

    Here are the first pendants that I have cast my self. Truely one of a kind because I'm just starting to mess with casting and don't have a clue how I got those colors. View image in gallery View image in gallery View image in gallery
  6. S

    Heavy Duty Cast Iron Swivel Castors - $15 (Wake Forest)

    Not Mine! Although 4 of these would be better! Heavy Duty Cast Iron Swivel Castors - $15 (Wake Forest) Date: 2010-01-04, 11:18AM EST Reply to: sale-ywnhr-1536620964@craigslist.org [Errors when replying to ads?] Two brand new (never used) cast iron swivel castors. Wheels are 6"x 2"...
  7. CarvedTones

    small cast iron pan/hibachi/???

    I have been keeping an eye out for a cheap or free old hibachi or frying pan or ??? that is cast iron and big enough to use as a "mini-forge". The idea is you take an iron vessel, line with all clay clumping cat litter and you can use a torch to heat steel (tool or knife blanks) to anneal it for...
  8. J

    Cast Iron Table

    I Have A Couple Of Old Tools. A Delta Table Saw And A Delta 6" Jointer. The Table On Both Are Rusty And Drag When Feeding Wood. I Have Been Agonizing On How To Properly Cure This Problem. I Suddenly Had To Get It Done Today. I Used A Circular Scotchbrite Hook & Loop Pad On My Ramdom Orbit...
  9. farmerbw

    Brazing Cast Iron pump body possible?

    It's about time to start getting my irrigation system put back together and in working order which means I've now got to address a problem I've been putting off since Jan. Long story short I messed up and didn't fully drain my 1.5 hp well pump before going away for a week, so of course we had a...
  10. merrill77

    cast wings for Delta contractor saw

    I've got a stamped wing on one side and a not-so-flat plywood table on the other. I've always wanted to buy cast wings - but I see some pretty ridiculous prices on them (e.g. $150 ea). Any suggestions?
  11. DavidF

    Custom cast glass in NC

    I need some heavily rippled, 1/2" thick coloured glass. sizes approx 4" x 70" and 27" x 43". looking around the web it seems as though I'll need to get this specially made. Do any of you out there know of a speciality glass supplier in the area, or at least within a resonable distance? TIA
  12. Bigdog72

    Cleaning "Experienced" Cast Iron

    I noticed some rust on my table saw Sunday so I set to cleaning and rewaxing. Came out very nice but during the process I noticed that my saw top is very "experienced" (read that stained). I am wondering if anyone has any recomendations for removing stains, scratches, etc. My inclination is to...
  13. WoodWrangler

    Casters & Cast Iron

    In my shop, tools MUST be on wheels. I just don't have the space. So, I ordered the same wheels I'm using on my larger bandsaw from Great Lakes Caster. I ordered knowing I might have hole size issue and other issue ... but figured I'd work around them. And ... I have two issues. 1. The...
  14. pslamp32

    What do you use on cast iron...

    for rust control? I've just been using Johnson Paste Wax. Don't know if this is good or not. I haven't had the tools long enough to really judge. Just curious what y'all use. Thanks!:-)
  15. mkepke

    Ooops ! Know anybody that welds cast iron ?

    I managed to shear off the chunk of cast iron that controls the raise/lower mechanism on my planer. :slap: Know anybody that can weld cast iron ? Haven't gotten the call back from the dealer yet, but I suspect this part is really expensive to replace, since it is cast as part of a precision...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top