bent

  1. rifle_breakdown_24_

    rifle_breakdown_24_

    Early 19th century rebuild/restore piece
    • danmart77
    • Media item
    • and bent dirty patchbox toeplate
    • Comments: 0
    • Album: Wayne Rifle Restoration
  2. Timmy

    Cedar sewing box

    This is a cedar sewing box I've been working on. Hand cut dovetails. Steam bent handle. Slide in lid. Overall size is 9"x11"x5". For more pictures of the build click here.
  3. S

    need plans for Amish bent rocker

    I just got home from the Lancaster, Pa. area where I saw a rocker I would love to try and build. It was in a small Amish shop that I went in. It is called a bent rocker, I presume because of the steam bending on parts of the frame. Has anyone ever tried this type of chair or know of where I...
  4. CrealBilly

    My neck is bent

    I went to change strings and set up my bass this evening and noticed the neck was bent forward ever so slightly. I loosened the truss rod and it did not spring back :tinysmile_cry_t: I guess after 22 years of being strung up even maple gets tired. I'm trying to straighten the neck by bending...
  5. S

    Bent Plywood for old theater seats

    I have 3 theater seats that the plywood has delaminated and rotted. Does anybody know how to make replacements, or who will make them. I can send a sample of the back and seat. I don’t have a bandsaw to cut the mold, which I know makes it fairly difficult to make. Thanks Neil
  6. lottathought

    Bent the shaft on my sander

    I need a little advice from one of the tool experts on here. I have the Ridgid oscillating spindle and belt sander. This summer, a weed eater jumped off the wall in the garage and landed on the sander. I thought everything was ok at the time..but I was too busy to do any woodwork this summer. I...
  7. nelsone

    Cypress Bent Lamination Questions

    I have been asked to make a hammock stand and am thinking of trying to do some bent lamination. I want to use cypress. The questions I have are how thick would you make the laminations and would TB3 be satisfactory for gluing the laminations. Here's a pic of the basic design I want to use.
  8. T

    Glue for bent wood laminations

    I am building a sleigh bed from walnut featuring multiple slats instead of a solid field for the head board and foot board. I am planning to use bent wood laminations for the compound curved slats. This will be my first venuture into bentwood lamination. I have already made the two forms for...
  9. P

    bent lamination lamp

    ttrying to get a copy of this show. anyone know how
  10. R

    Bent Wood Box

    Ever watched one of those woodworking shows on TV and wondered if you could do that? David Marks does that for me. I don't like his designs but I like his techniques. I had to try bent wood lamination. This box started wandering around in the back of my head for about a year. I finnally finished...
  11. M

    Best glue for bent laminating

    After reading several articles on glues, and what each one is best used for, I am still confused as to which is best for bent laminating. I have used the yellow stuff for years, usually Titebond II, with good success. But not for any bent stuff. I am making a bookcase with curving front posts...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top