wood gloat and question

Status
Not open for further replies.

tkpinsc

New User
Tod Parks
The Gloat.

I finally got hooked up with my wood seller from my last thread.

About 200 ft eastern white pine in 6/4 furniture grade.
about 200 ft jatoba
about 125 ft recovered heart pine
about 100 ft wide live edge oak, including some crotch "artistic wood"from a tree the seller cut down
about 75 ft misc cherry, maple and cyprus
several slabs of oak sawn 1 face, live on the other three.

This was bought from a couple that closed a furniture shop about 10 years ago and knew the value but wanted gone with the least effort possible for $600.


The question.

It's all clean, dry and straight, been stored about 10 years since the shop closed, except the oak.

The oak came with some critter holes, and I need some suggestions on how to make sure they've all move out before I store the wood with my good stuff.
 

Bill Clemmons

Bill
Corporate Member
From previous post on here it appears the best way to make sure they are gone is to place them in a kiln at a certain temperature. You might want to contact one of the sawyers on here who has a kiln to see if they'll treat it for you.

HTH

Bill
 
Status
Not open for further replies.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top