wide boards need jointer and resaw

[jonnyfontaine]

hi... i am looking to get a 15/16" thick x 8" wide x 20" long board of curly maple resawn into two 1/4" boards and one 3/16" veneer (if possible) and also 2, 2" thick x 7" wide x 19" long boards of mahogany resawn to get an 3/16" veneer from each, and then have the mahogany and 1/4" thick curly maple (if possible) edge joined through a jointer and the faces of the mahogany run through a jointer as well... whheeeww, ok that's asking a lot i know, so if anyone knows of a place in the raleigh area, or anyone in the raleigh area can do this, i'd very very much appreciate it, thanks jonny

p.s. can you run curly maple through a jointer or with it tear the edges up?

 

[GeorgeL]

Johnny.

I have a 12" jointer and an 18" band saw that can definitely handle the job. I would be more than happy to let you use my shop.

George

 

[scsmith42]

Jonny, if you don't hook up with George you're welcome to stop by and use my equipment. I have spiral cutterheads on my jointer, which helps to reduce tear out on figured woods.

Scott

 

[cskipper]

This is one of the reasons I love this group!