wide boards need jointer and resaw

Status
Not open for further replies.

jonnyfontaine

New User
Jonny
hi... i am looking to get a 15/16" thick x 8" wide x 20" long board of curly maple resawn into two 1/4" boards and one 3/16" veneer (if possible) and also 2, 2" thick x 7" wide x 19" long boards of mahogany resawn to get an 3/16" veneer from each, and then have the mahogany and 1/4" thick curly maple (if possible) edge joined through a jointer and the faces of the mahogany run through a jointer as well... whheeeww, ok that's asking a lot i know, so if anyone knows of a place in the raleigh area, or anyone in the raleigh area can do this, i'd very very much appreciate it, thanks jonny

p.s. can you run curly maple through a jointer or with it tear the edges up?
 

GeorgeL

New User
George
Johnny.

I have a 12" jointer and an 18" band saw that can definitely handle the job. I would be more than happy to let you use my shop.

George
 

scsmith42

New User
Scott Smith
Jonny, if you don't hook up with George you're welcome to stop by and use my equipment. I have spiral cutterheads on my jointer, which helps to reduce tear out on figured woods.

Scott
 
Status
Not open for further replies.

Our Sponsors

LATEST FOR SALE LISTINGS

Top