ToyBox Competed

Status
Not open for further replies.

Canuck

Wayne
Corporate Member
Have not really spent a whole lot of time in the shop this Fall/Winter so I decided to work myself back into it with something simple like building our newest granddaughter a toy box.

Built it along the same lines as her dresser and change table completed in 2016.

36” x 18” x 20” and utilized another set of the Rockler torsion hinges in order to ensure no slammed fingers-we’ll see. (Finished with 2 coats of Kilz primer and 3 coats of SW ProClassic acrylic enamel.)

IMG_17053.JPG



(Here are a couple of pictures of the change table and dresser that I completed previously.)​

IMG_06143.JPG


IMG_06202.JPG


Thanks for looking.

Wayne​


 

Canuck

Wayne
Corporate Member
That looks great Wayne!

Do you have any issues with acrylic enamel “sticking”?

Never had an issue. Usually sand to 150-180G, use a primer and then apply thin and even coats (with ample dry time) of the Sherwin Williams ProClassic.

Wayne
 
Status
Not open for further replies.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top