This is Mahogany. When I was spraying the sanding sealer this little chip/tearout reared its ugly head. I didn't catch it in the prep, so now I need to see if there is a fix I can use to minimize the appearance of this. It is on the face frame and some will be covered by the drawer, but to me, that is a lame excuse. I was thinking of using a amber shellac stick maybe to fill and then when I spray the finish so the elevation would be even and the shellac would subdue the imperfection appearance.
Anyone have a better/other solutions for this ? Thanks !
Anyone have a better/other solutions for this ? Thanks !