Sorby rougher and finisher

[HLW]

Has any one used or seen this tool from Sorby. The tips are hss rather than carbide. I thought maybe one could by the carbide tips from another source and use them on this one. What think you? I hope you can open the link?:widea:

http://www.woodturnerscatalog.com/s..._45o_Shear_Scraper___sorby_shear_scraper?Args

 

[NZAPP1]

I have them. You will not be able to use them as a rougher or finisher as the tool is set to cut at a 45 degree angle. I have replaced the cutters with carbide ones and it is one heck of a scraper.