Please sign up here even if you posted on the other thread.
Remember there is a $30 donation requested for this workshop.
Idealy you would want to bring three planes,
1. a scrub or try plane in the 5-6 Stanley number range with cambered blade.
2. A jointer in the 7-8 range
3. A #3 or 4 with a good flat blade.
some rough cut boards in poplar, soft maple, or pine 3-4 feet long and wide as possible 4/4 to 8/4
if you have none of this we can take turns with my planes.
Remember there is a $30 donation requested for this workshop.
Idealy you would want to bring three planes,
1. a scrub or try plane in the 5-6 Stanley number range with cambered blade.
2. A jointer in the 7-8 range
3. A #3 or 4 with a good flat blade.
some rough cut boards in poplar, soft maple, or pine 3-4 feet long and wide as possible 4/4 to 8/4
if you have none of this we can take turns with my planes.
Last edited: