Been on the lookout for a taper file small enough to sharpen an old 15-16tpi dovetail saw I bought for the express purpose of learning to sharpen one. Nobody carries a small enough file though, except for a $23 kit of needle files from the BORG, which is about twice as much as it would cost to have it sharpened.
Until I stumbled across a small file set at Harbor Freight the other day for $3. It includes a 3-4" taper file that is beginning to put some bite back in my saw's teeth. Figured I'd pass it along.
Until I stumbled across a small file set at Harbor Freight the other day for $3. It includes a 3-4" taper file that is beginning to put some bite back in my saw's teeth. Figured I'd pass it along.