I was talking with some people and we are trying to figure out a fare price for Burled Birdseye Maple pcs and Burled Cherry...We had discussed price per pound and price per blank...We thought it would be a good post so we could get everyone opinion...
This a request...
Birdseye Maple Burl
1= larger bowls/vases. I figure 10-12" max diameter and same for the max height.
2= 10x10x3"
3= 10x10x4 & 5"
4= 12x12 4 & 5"
5= 26"x26"x26" whole piece.
Or price per pound?
Also on Cherry Burl Price per pound or dim?
8x8x4"
10x10x5"
12x12x5"
Thanks for all the help...Guys I'm just try to be fair... I have listed below some of the things to think about also when suppling wood. But please remember I have had to find the tree's (lots of walking) Carrying normally (500 plus yards out of the woods to the 4wheeler:thumbs_do). Bringing home cutting into Blanks (several hours cutting and cleaning:thumbs_do (Dang Saw Dust)) then Anchor sealing all pcs with a brush.:confused_..This takes the most time and makes the most mess:crossedlips:. Just today I burned 4 tanks of gas 1 QT motor oil, and was in the woods from 2:00 to 7:00 and now heading to the bandsaw to slab and seal/paint 6 sides of wood...:icon_scra Anyone have any ideas other than anchor seal? This stuff is $$$.
I have an ad in Classifieds section with current pcs I cut today with prices...Every pcs is covered in Birds eyes and burl...with some ambrosia streaks in it also.
This a request...
Birdseye Maple Burl
1= larger bowls/vases. I figure 10-12" max diameter and same for the max height.
2= 10x10x3"
3= 10x10x4 & 5"
4= 12x12 4 & 5"
5= 26"x26"x26" whole piece.
Or price per pound?
Also on Cherry Burl Price per pound or dim?
8x8x4"
10x10x5"
12x12x5"
Thanks for all the help...Guys I'm just try to be fair... I have listed below some of the things to think about also when suppling wood. But please remember I have had to find the tree's (lots of walking) Carrying normally (500 plus yards out of the woods to the 4wheeler:thumbs_do). Bringing home cutting into Blanks (several hours cutting and cleaning:thumbs_do (Dang Saw Dust)) then Anchor sealing all pcs with a brush.:confused_..This takes the most time and makes the most mess:crossedlips:. Just today I burned 4 tanks of gas 1 QT motor oil, and was in the woods from 2:00 to 7:00 and now heading to the bandsaw to slab and seal/paint 6 sides of wood...:icon_scra Anyone have any ideas other than anchor seal? This stuff is $$$.
I have an ad in Classifieds section with current pcs I cut today with prices...Every pcs is covered in Birds eyes and burl...with some ambrosia streaks in it also.