Need a small piece of thin cherry ply 12x24

Status
Not open for further replies.

merrill77

Master Scrap Maker
Chris
I need at least 11 1/2 x 22 1/2". I'd prefer 1/4" thick, but could get by with 3/8 or 1/2".

Anyone in the Triangle area have a little I can buy or trade for? I'm not going to buy a full sheet for this small bit. Worse comes to worse, I can get by with some BB ply that I have on hand, but if I can get a little cherry, it would be better.

TIA!
Chris
 

MarkE

Mark
Corporate Member
Does it have to be good on both sides.

I have a piece of 1/4" that is ~33" x 29", but only good on one side.
 

merrill77

Master Scrap Maker
Chris
Does it have to be good on both sides.

I have a piece of 1/4" that is ~33" x 29", but only good on one side.

It doesn't have to be _cherry_ on both sides. As long as the other side isn't somehow unattractive, it should be fine - the other side will only be visible to people laying in the floor :>

Do you ever come up into Raleigh or RTP?
 

MarkE

Mark
Corporate Member
I don't get up there very often, unless I see a craigslist deal I can't pass up.
 

Phil S

Phil Soper
Staff member
Corporate Member
I just checked my scrap. I have several pieces of 1/4 cherry and I can cut exactly what you need. I am in NE Raleigh

Phil
 
Status
Not open for further replies.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top