J
jeff...
User not found
So Fred, is it true - you can crank out a whole desk in one weekend? Let let me tell you...
- Status
no... a whole desk take at least 4 days!:gar-La; more like a week if I wait for the glue to dry. 
day 1 the rough lumber is machined to size. day 2 stiles rails are cut and shaped and the panels are glued up. with me so far? day 3 the legs are turned and the drawers [up to 8 of them] are made without fronts and the panels are sanded and raised. day 4 the boxes are made with face frames the panels are sprayed 2 coats along with drawers. day 5 everything is assembled sanded and preped for finish. day 6 everything gets sprayed as many coats as needed. day 7 the drawer slides get installed and the thing is carried into the office and put in place. tops take an additional couple days when I get a round tuit! :gar-Bi prolly could get the tops done during the desk steps but I dont have that much room or that many clamps.:eusa_danc any questions?.... ask Jeff....:rotflm:
day 1 the rough lumber is machined to size. day 2 stiles rails are cut and shaped and the panels are glued up. with me so far? day 3 the legs are turned and the drawers [up to 8 of them] are made without fronts and the panels are sanded and raised. day 4 the boxes are made with face frames the panels are sprayed 2 coats along with drawers. day 5 everything is assembled sanded and preped for finish. day 6 everything gets sprayed as many coats as needed. day 7 the drawer slides get installed and the thing is carried into the office and put in place. tops take an additional couple days when I get a round tuit! :gar-Bi prolly could get the tops done during the desk steps but I dont have that much room or that many clamps.:eusa_danc any questions?.... ask Jeff....:rotflm:- Status
Premier Sponsors
Contact for your financial processing needs!
Our Sponsors
LATEST FOR SALE LISTINGS
-
-
-
-
-
For Sale Lie-Nielsen, Veritas, Starrett, WoodRiver, Woodpecker
- Started by Kirsti K
- Replies: 0