I’m in South Charlotte and just got a portable laser engraver (LaserPecker 2) with a rotary attachment. I don’t know all its capabilities yet but happy to give it a shot with youdoes anyone in the Charlotte area have a 4 axis laser that can do something like this.
View attachment 247414
If you have some, it'd be worthwhile to practice on some dowel pieces of roughly the same diameterI’m in South Charlotte and just got a portable laser engraver (LaserPecker 2) with a rotary attachment. I don’t know all its capabilities yet but happy to give it a shot with you
Another way to do it would be to engrave it when he gets the larger diameter part cut to size. Then he can finish forming the narrower upper part of the bottle after you engrave the bottom part.Mike,
I've got a 50W laser with a rotary. I've used it on some yeti tumblers recently. It's a roller style rotary (versus a chuck rotary) but will work for this. what I've learned with doing the tumblers is always do test pieces
What i've done with the tumblers is make fittings to go on the ends of the piece to make each end the same diameter so it rolls on the rotary consistently.
Happy to help out, and i'm just down the road.